USB Charging Port & Voltmeter
| Panel cut-out | 30mm |
|---|---|
| Behind-panel depth | 26.5mm |
| Overall length | 51mm |
| Input voltage | 12V or 24V |
| USB-C | Power Delivery, 30W |
| USB-A | Quick Charge 3.0, 18W |
| Voltmeter | blue LED display |
| On/off switch | powers both USB ports |
| Terminals | 2 x spade (positive / negative) |
| Certification | UL, CE |
| Protection | overload, over-voltage, over-current, overheating, short circuit |
A panel-mount USB charging port with a built-in voltmeter and on/off switch. It fits any 30mm dash hole and runs on 12V or 24V systems.
There's one USB-C port with Power Delivery (30W) and one USB-A port with Quick Charge 3.0 (18W) — enough to charge phones, tablets, headphones, GPS units and dash cams, anything that takes a USB cable. The built-in voltmeter reads system voltage straight off the supply, which is handy for keeping an eye on a battery between trips or while running accessories. The on/off switch cuts power to both ports so nothing draws current when the unit's unattended.
The hinged cap covers the ports when nothing's plugged in to keep dust and splashing water out, and a rubber gasket behind the bezel seals against the panel when it's fitted properly. It's wired through two spade terminals on the back — mark the positive and negative leads as you fit it.
We'd recommend an in-line fuse on the supply side on any 12V or 24V install — typically 5A is enough.
UL and CE certified, with built-in protection against overload, over-voltage, over-current, overheating and short circuit.
- Panel cut-out: 30mm
- Behind-panel depth: 26.5mm
- Overall length: 51mm
- Input: 12V or 24V
- USB-C: Power Delivery, 30W
- USB-A: Quick Charge 3.0, 18W
- Voltmeter: blue LED display
- Terminals: 2 × spade (positive / negative)
- Certification: UL, CE
| Panel cut-out | 30mm |
|---|---|
| Behind-panel depth | 26.5mm |
| Overall length | 51mm |
| Input voltage | 12V or 24V |
| USB-C | Power Delivery, 30W |
| USB-A | Quick Charge 3.0, 18W |
| Voltmeter | blue LED display |
| On/off switch | powers both USB ports |
| Terminals | 2 x spade (positive / negative) |
| Certification | UL, CE |
| Protection | overload, over-voltage, over-current, overheating, short circuit |
A panel-mount USB charging port with a built-in voltmeter and on/off switch. It fits any 30mm dash hole and runs on 12V or 24V systems.
There's one USB-C port with Power Delivery (30W) and one USB-A port with Quick Charge 3.0 (18W) — enough to charge phones, tablets, headphones, GPS units and dash cams, anything that takes a USB cable. The built-in voltmeter reads system voltage straight off the supply, which is handy for keeping an eye on a battery between trips or while running accessories. The on/off switch cuts power to both ports so nothing draws current when the unit's unattended.
The hinged cap covers the ports when nothing's plugged in to keep dust and splashing water out, and a rubber gasket behind the bezel seals against the panel when it's fitted properly. It's wired through two spade terminals on the back — mark the positive and negative leads as you fit it.
We'd recommend an in-line fuse on the supply side on any 12V or 24V install — typically 5A is enough.
UL and CE certified, with built-in protection against overload, over-voltage, over-current, overheating and short circuit.
- Panel cut-out: 30mm
- Behind-panel depth: 26.5mm
- Overall length: 51mm
- Input: 12V or 24V
- USB-C: Power Delivery, 30W
- USB-A: Quick Charge 3.0, 18W
- Voltmeter: blue LED display
- Terminals: 2 × spade (positive / negative)
- Certification: UL, CE