USB Charging Port & Voltmeter
A panel-mount USB charging port with built-in voltmeter and on/off switch. Fits any 30mm dash hole.
One USB-C port with Power Delivery (30W) and one USB-A port with Quick Charge 3.0 (18W). Charges phones, tablets, headphones, GPS units, dash cams — anything that takes a USB cable.
The integrated voltmeter reads system voltage straight off the supply, useful for keeping an eye on a battery between trips or while running accessories. The on/off switch cuts power to both ports — handy if you don't want anything drawing current when the unit is unattended.
Runs on 12V or 24V systems.
The hinged cap covers the ports when nothing's plugged in, keeping dust and splash water out. A rubber gasket behind the bezel seals against the panel when fitted properly.
Wired through two spade terminals on the back. Mark the positive and negative leads as you fit it. We'd recommend an in-line fuse on the supply side as a sensible precaution on any 12V or 24V installation — typically 5A is enough.
UL and CE certified. Built-in protection against overload, over-voltage, over-current, overheating and short circuit.
Specifications
- Panel cutout: 30mm
- Behind-panel depth: 26.5mm
- Overall length: 51mm
- Input voltage: 12V or 24V
- USB-C: Power Delivery, 30W
- USB-A: Quick Charge 3.0, 18W
- Voltmeter: LED display, blue
- On/off switch: powers both USB ports
- Terminals: 2 × spade (positive / negative)
- Certification: UL, CE
- Protection: overload, over-voltage, over-current, overheating, short circuit
A panel-mount USB charging port with built-in voltmeter and on/off switch. Fits any 30mm dash hole.
One USB-C port with Power Delivery (30W) and one USB-A port with Quick Charge 3.0 (18W). Charges phones, tablets, headphones, GPS units, dash cams — anything that takes a USB cable.
The integrated voltmeter reads system voltage straight off the supply, useful for keeping an eye on a battery between trips or while running accessories. The on/off switch cuts power to both ports — handy if you don't want anything drawing current when the unit is unattended.
Runs on 12V or 24V systems.
The hinged cap covers the ports when nothing's plugged in, keeping dust and splash water out. A rubber gasket behind the bezel seals against the panel when fitted properly.
Wired through two spade terminals on the back. Mark the positive and negative leads as you fit it. We'd recommend an in-line fuse on the supply side as a sensible precaution on any 12V or 24V installation — typically 5A is enough.
UL and CE certified. Built-in protection against overload, over-voltage, over-current, overheating and short circuit.
Specifications
- Panel cutout: 30mm
- Behind-panel depth: 26.5mm
- Overall length: 51mm
- Input voltage: 12V or 24V
- USB-C: Power Delivery, 30W
- USB-A: Quick Charge 3.0, 18W
- Voltmeter: LED display, blue
- On/off switch: powers both USB ports
- Terminals: 2 × spade (positive / negative)
- Certification: UL, CE
- Protection: overload, over-voltage, over-current, overheating, short circuit