Cart 0
Fuel Gauge
Move your mouse over image or click to enlarge
Fuel Gauge Fuel Gauge Fuel Gauge Fuel Gauge Fuel Gauge

Fuel Gauge

  • £33.79



    Analogue fuel level gauge for monitoring of fuel tank level.

    Works with either S3 or S5 senders. Available in European (0-190ohms) or US (240-20ohms) specification.

    Available in all standard face and bezel colours to ensure continuity with all other gauges.


    • Fuel level
    • 52mm diameter gauge
    • 12v/24v
    • Marine grade - IP67 waterproof
    • 0-190 ohms or 240-30 ohms
    • Backlight - Red or Amber
    • Choice of face & bezel colours





    Yellow       -    yellow̴ light
    Orange     -    red light
    Black        -    to sensor
    Red           -    to positive (+)
    Blue          -    to ground (-)


    1. Cut a 52mm (2 1/16") diameter hole in the panel. 
    You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.

    2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.

    3. Connect wires according to wiring diagram. 

    Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.

    * Note the use of dropping resistors for 24V circuit.

    4. Insert wire harness into port at the back of the gauge.