110374

Engine Oil Pressure Gauge

Regular price £40.53
/

ANALOGUE OIL PRESSURE GAUGE

 

Analogue oil pressure gauge available for 0-5 bar (75 psi) & 0-10 bar (145 psi) applications.

Works with a range of pressure sensors 

 

  • Engine oil pressure
  • 0-5 Bar or 0-10 Bar
  • 52mm diameter gauge
  • 12v/24v
  • Choice of colours

 
 

INSTALLATION̴

 

WIRING INSTRUCTIONS

Yellow       -    yellow̴ light
Orange     -    red light
Black        -    to sensor
Red           -    to positive (+)
Blue          -    to ground (-)

INSTALLATION INSTRUCTIONS

1. Cut a 52mm (2 1/16") diameter hole in the panel. 
You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.

2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.

3. Connect wires according to wiring diagram. 

Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.

* Note the use of dropping resistors for 24V circuit.

4. Insert wire harness into port at the back of the gauge.

New
Wema UK APP

Do you visit Wema from a mobile or tablet?
Our new Wema app is made for you!
Download now for Apple & Android