Water Temperature Gauge - Wema UK
Water Temperature Gauge - Wema UK
Water Temperature Gauge - Wema UK
Water Temperature Gauge - Wema UK
Water Temperature Gauge - Wema UK

110655

Water Temperature Gauge

Regular price £40.13
/

ANALOGUE WATER TEMPERATURE GAUGE

 

  • Engine coolant temperature gauge
  • 40 - 120ºC
  • 450-23 ohms
  • 52mm diameter gauge
  • 12v/24v
  • Marine grade - IP65 waterproof
  • Choice of colours

 

Analogue water temperature gauge for measuring water / coolant temperature ensuring safe operation of the engine.

Works with Wema temperature sensors.

 

 

INSTALLATION

 

WIRING INSTRUCTIONS

Yellow       -    yellow̴ light
Orange     -    red light
Black        -    to sensor
Red           -    to positive (+)
Blue          -    to ground (-)

INSTALLATION INSTRUCTIONS

1. Cut a 52mm (2 1/16") diameter hole in the panel. 
You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.

2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.

3. Connect wires according to wiring diagram. 

Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.

* Note the use of dropping resistors for 24V circuit.

4. Insert wire harness into port at the back of the gauge.

New
Wema UK APP

Do you visit Wema from a mobile or tablet?
Our new Wema app is made for you!
Download now for Apple & Android

You may also like