Holding Tank Level Gauge - Wema UK
Holding Tank Level Gauge - Wema UK
Holding Tank Level Gauge - Wema UK
Holding Tank Level Gauge - Wema UK

110397

Holding Tank Level Gauge

Regular price £39.52
/

ANALOGUE HOLDING TANK LEVEL GAUGE

 

 

  • Black water level
  • 52mm diameter gauge
  • 12v/24v
  • Marine grade - IP67 waterproof
  • 240-30 ohms
  • Backlight - Red or Yellow
  • Choice of face & bezel colours


 

Analogue holding tank (black water) level gauge for monitoring of tank level.

Works with S3-H senders. 

Available in all standard face and bezel colours to ensure continuity with all other gauges.

 


 

INSTALLATION̴

 

WIRING INSTRUCTIONS

Yellow       -    yellow̴ light
Orange     -    red light
Black        -    to sensor
Red           -    to positive (+)
Blue          -    to ground (-)

INSTALLATION INSTRUCTIONS

1. Cut a 52mm (2 1/16") diameter hole in the panel. 
You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.

2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.

3. Connect wires according to wiring diagram. 

Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.

* Note the use of dropping resistors for 24V circuit.

4. Insert wire harness into port at the back of the gauge.

New
Wema UK APP

Do you visit Wema from a mobile or tablet?
Our new Wema app is made for you!
Download now for Apple & Android