- 52mm diameter gauge
- 12v or 24v
- Choice of colours.
Digital Voltmeter available for 12v and 24v circuits.
Available in a choice of face and bezel colours.
Yellow - yellow̴ light
Orange - red light
Red - to positive (+)
Blue - to ground (-)
1. Cut a 52mm (2 1/16") diameter hole in the panel.
You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.
2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.
3. Connect wires according to wiring instruction.
Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.
4. Insert wire harness into port at the back of the gauge.