Menu
Cart 0
Engine Oil Pressure Gauge
Move your mouse over image or click to enlarge
Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge Engine Oil Pressure Gauge

Engine Oil Pressure Gauge

    PRODUCT CODE:
  • £40.53


  • ANALOGUE OIL PRESSURE GAUGE

     

    Analogue oil pressure gauge available for 0-5 bar (75 psi) & 0-10 bar (145 psi) applications.

    Works with a range of pressure sensors 

     

    • Engine oil pressure
    • 0-5 Bar or 0-10 Bar
    • 52mm diameter gauge
    • 12v/24v
    • Choice of colours

     
     

    INSTALLATION̴

     

    WIRING INSTRUCTIONS

    Yellow       -    yellow̴ light
    Orange     -    red light
    Black        -    to sensor
    Red           -    to positive (+)
    Blue          -    to ground (-)

    INSTALLATION INSTRUCTIONS

    1. Cut a 52mm (2 1/16") diameter hole in the panel. 
    You will need a minimum clearance of 55mm (2 3/16") behind the panel to fit the gauge.

    2. Remove fastening ring and insert gauge through panel from the front, fit and tighten fastening ring from the rear.

    3. Connect wires according to wiring diagram. 

    Select either Orange or Yellow wires for backlighting. Wire colour corresponds with backlight colour.

    * Note the use of dropping resistors for 24V circuit.

    4. Insert wire harness into port at the back of the gauge.